Slider Bass

Anything apart from the two mainstream default harmonicas (Solo-tuned fully-valved chromatic, and un-valved Richter 10-hole diatonic). Alternate tunings, different construction, new functionality, interesting old designs, wishful-thinking... whatever!
Post Reply
Gary Richardson
Posts: 2
Joined: Fri May 05, 2017 9:24 pm

Slider Bass

Post by Gary Richardson » Fri May 05, 2017 10:03 pm

Brendan,

Will your Slider Bass kit work on a Huang Bass that is the same size or similar to the Hohner 265?

Thanks

Gary

User avatar
Brendan
Posts: 201
Joined: Fri Mar 24, 2017 2:28 pm
Contact:

Re: Slider Bass

Post by Brendan » Sun May 07, 2017 7:58 am

'Same size' = yes.

'Similar' = probably not, unless the dimensions are within 0.5mm overall in length and width.

If you can send photos and exact measurements I can give you an assessment.

Gary Richardson
Posts: 2
Joined: Fri May 05, 2017 9:24 pm

Re: Slider Bass

Post by Gary Richardson » Tue May 09, 2017 2:19 am

Thanks Brendan,
I had also queried George Miklas and George said no. The reason being that the holes on the Huang are above and below each other.
The Hohner holes are staggered (off set) between the decks

Gary

Post Reply