Page 1 of 1

Slider Bass

Posted: Fri May 05, 2017 10:03 pm
by Gary Richardson
Brendan,

Will your Slider Bass kit work on a Huang Bass that is the same size or similar to the Hohner 265?

Thanks

Gary

Re: Slider Bass

Posted: Sun May 07, 2017 7:58 am
by Brendan
'Same size' = yes.

'Similar' = probably not, unless the dimensions are within 0.5mm overall in length and width.

If you can send photos and exact measurements I can give you an assessment.

Re: Slider Bass

Posted: Tue May 09, 2017 2:19 am
by Gary Richardson
Thanks Brendan,
I had also queried George Miklas and George said no. The reason being that the holes on the Huang are above and below each other.
The Hohner holes are staggered (off set) between the decks

Gary