Page 1 of 1
Slider Bass
Posted: Fri May 05, 2017 10:03 pm
by Gary Richardson
Brendan,
Will your Slider Bass kit work on a Huang Bass that is the same size or similar to the Hohner 265?
Thanks
Gary
Re: Slider Bass
Posted: Sun May 07, 2017 7:58 am
by Brendan
'Same size' = yes.
'Similar' = probably not, unless the dimensions are within 0.5mm overall in length and width.
If you can send photos and exact measurements I can give you an assessment.
Re: Slider Bass
Posted: Tue May 09, 2017 2:19 am
by Gary Richardson
Thanks Brendan,
I had also queried George Miklas and George said no. The reason being that the holes on the Huang are above and below each other.
The Hohner holes are staggered (off set) between the decks
Gary