question about retuning harmonicas

Anything apart from the two mainstream default harmonicas (Solo-tuned fully-valved chromatic, and un-valved Richter 10-hole diatonic). Alternate tunings, different construction, new functionality, interesting old designs, wishful-thinking... whatever!
Post Reply
User avatar
triona
Posts: 80
Joined: Thu Mar 30, 2017 3:24 pm
Location: Aue / Germany

question about retuning harmonicas

Post by triona » Wed Aug 29, 2018 2:07 am

Last evening I made my first attempt to retune a harmonica. I took a new chinese budget harp from the mall. It was in Richter C. (There are no others with this type.) I retuned it into C# / Db - just a semitone up on each reed, nothing extravagant. Just to get a feeling for this work. And I had no bluesharp in C# either.

I tuned it as close as possible to zero sharp or flat, by pinging the reeds on the naked reedplate into the tuner (a 5 cent tuner Korg CA). Then I mounted the harp again and played it by normal blow and draw. All the reeds were about 20 cent flatter than before when dismounted and pinged, some even a little bit more than 20 cent.

Question 1: Is this Mr. Helmholtz that tricked me?
Or what else is the issue?

Question 2: Are these 20 - 25 cents more flat a constant, or can this also be different when tuning any other instrument?

Question 3: Is it to recommend to add these 20 or 25 cent in advance (in the case of a constant)? Or is it necessary to test this on one reed before continuing the work to avoid to do all the work twice?

Question 4: When I want to tune a reed lower, is it necessary to leave it 20 or 25 cents above the intented pitch?


And additional question 5:
What is the recommended maximum for the change of pitch before the risk of damaging the reed? Is the maximum the same for tuning higher or lower? Is there a difference between brass or phosphor-bronze or steel reeds?


dear greetings
triona
Aw, Thou beloved, do hearken to the Banshee's lonely croon!
sinn féin - ça ira !
Cad é sin do'n té sin nach mbaineann sin dó


https://www.youtube.com/channel/UC1yI3H ... 9ktgzTR2qg

Post Reply