New Tool and Method for Improving Harmonica Reed Response

A space for players interested in my specialist harmonicas, alternate tunings, instructional material, recordings etc to ask questions and share information, experiences, videos etc.
User avatar
Brendan
Posts: 578
Joined: Fri Mar 24, 2017 2:28 pm
Contact:

New Tool and Method for Improving Harmonica Reed Response

Post by Brendan » Sun Jan 13, 2019 10:18 am

Here's a video to accompany an upcoming article in the UK Harmonica World magazine:
https://www.youtube.com/watch?v=eQP6tZRXbTU

User avatar
triona
Posts: 270
Joined: Thu Mar 30, 2017 3:24 pm
Location: Aue / Germany

Re: New Tool and Method for Improving Harmonica Reed Response

Post by triona » Sun Jan 13, 2019 12:01 pm

My first thought after I had heard your first words to describe the issue:
To lower the base of each reed by engraving a little notch into the reedplate under each reed to countersink it to the surface of the reedplate. But this were not less work and hazzle than bending and reshaping each reed. An it would not only require dismounting and remounting each reed. It also would require a big effort to get the notches sufficiently flat and parallel to give the reed a proper new fit. Eventually even more than less issues than the former method anyway. :?

In contrast your idea of elevating the edges of the reedplate to the niveau of the reeds is ingeniuosly simple and effective. I think I will try it at once. Maybe it works with simple standard nailpolish out of the bottle and spread by brush as well for a first try?

And one more question about the chemical quality of the nailpolish you recommended: Is it soluble in nailpolish remover as well as usual nailpolish? So that it could be removed or corrected afterwards easily and without hazard of damage to reeds or reedplates if necessary?


dear greetings
triona
Aw, Thou beloved, do hearken to the Banshee's lonely croon!
sinn féin - ça ira !
Cad é sin do'n té sin nach mbaineann sin dó


https://www.youtube.com/channel/UC1yI3H ... 9ktgzTR2qg

CrawfordEs
Posts: 99
Joined: Mon Apr 03, 2017 11:06 pm

Re: New Tool and Method for Improving Harmonica Reed Response

Post by CrawfordEs » Sun Jan 13, 2019 4:13 pm

Nice simple Idea. I love it.
Time to look for a nail art pen!
I bet it would work well as valve glue too.

User avatar
triona
Posts: 270
Joined: Thu Mar 30, 2017 3:24 pm
Location: Aue / Germany

Re: New Tool and Method for Improving Harmonica Reed Response

Post by triona » Sun Jan 13, 2019 8:38 pm

And if it should not work with the harmonica like expected, it can be used eventually for painting the nails anyway. :mrgreen:


dear greetings
triona
Aw, Thou beloved, do hearken to the Banshee's lonely croon!
sinn féin - ça ira !
Cad é sin do'n té sin nach mbaineann sin dó


https://www.youtube.com/channel/UC1yI3H ... 9ktgzTR2qg

Alan
Posts: 32
Joined: Wed Mar 29, 2017 3:17 pm

Re: New Tool and Method for Improving Harmonica Reed Response

Post by Alan » Mon Jan 14, 2019 12:28 pm

This is definitely worth a try. Did you try using it along the entire edge of the reed plate vs just 1/3 + embossing?

User avatar
Brendan
Posts: 578
Joined: Fri Mar 24, 2017 2:28 pm
Contact:

Re: New Tool and Method for Improving Harmonica Reed Response

Post by Brendan » Thu Jan 17, 2019 10:26 pm

For the lower 2/3 of the reed you should do standard embossing. It's not possible to use the nail art pen further down as the reed is flexible; it will slide underneath the tip of the tool. Anyway embossing the lower 2/3 in the conventional way is easy and effective, so there is no need to do anything different.

pakocheung
Posts: 3
Joined: Fri Apr 03, 2020 3:02 am

Re: New Tool and Method for Improving Harmonica Reed Response

Post by pakocheung » Fri Apr 03, 2020 3:14 am

Hi,

I like this idea too.

I have a question is that what is the cutting tool and where to get it.


Best regards

Cheung

User avatar
Brendan
Posts: 578
Joined: Fri Mar 24, 2017 2:28 pm
Contact:

Re: New Tool and Method for Improving Harmonica Reed Response

Post by Brendan » Fri Apr 03, 2020 10:11 am

You can get these thin pieces of shim from the magnetic security tags used by shops to prevent theft. Open the plastic casing and you will find one inside.

pakocheung
Posts: 3
Joined: Fri Apr 03, 2020 3:02 am

Re: New Tool and Method for Improving Harmonica Reed Response

Post by pakocheung » Fri Apr 03, 2020 2:40 pm

Hi Brendon,

Is something like the attached photo?


security tag.jpg
security tag.jpg (41.3 KiB) Viewed 1432 times

CrawfordEs
Posts: 99
Joined: Mon Apr 03, 2017 11:06 pm

Re: New Tool and Method for Improving Harmonica Reed Response

Post by CrawfordEs » Sun Apr 05, 2020 1:50 am

Nope
The little white rectangular strips stuck on small items and boxes.
Maybe 0.75 Cm x 2 Cm

Post Reply