Gasket Valve sets for MARS KongSheng ?

A space for players interested in my specialist harmonicas, alternate tunings, instructional material, recordings etc to ask questions and share information, experiences, videos etc.
Post Reply
Marty
Posts: 7
Joined: Tue Sep 24, 2019 4:22 pm

Gasket Valve sets for MARS KongSheng ?

Post by Marty » Tue Sep 24, 2019 4:34 pm

Hi Brendan,

Just discovered the excellent quality and sound of the KongSheng diatonics.

I see on your site you mention that you have Gasket Valves for the KongSheng Solist, but do you also have them for the KongSheng Mars model?

Thanks again for your innovations.

Marty Howe
https://martyhowemusic.com/

User avatar
RunBanjoRun
Posts: 92
Joined: Fri Mar 24, 2017 11:39 am
Location: Canterbury

Re: Gasket Valve sets for MARS KongSheng ?

Post by RunBanjoRun » Wed Sep 25, 2019 5:49 pm

Hey I'm the forum admin - message me if you have any ideas or requests :idea: :idea: :idea:

David

Marty
Posts: 7
Joined: Tue Sep 24, 2019 4:22 pm

Re: Gasket Valve sets for MARS KongSheng ?

Post by Marty » Wed Sep 25, 2019 7:13 pm

Just heard from David, who manages Brendan's website. Thank you David! :

"Hello Marty

We have now a version that will fit the Mars:

https://brendan-power.com/GasketValves.php

Best wishes,

David

User avatar
Brendan
Posts: 819
Joined: Fri Mar 24, 2017 2:28 pm
Contact:

Re: Gasket Valve sets for MARS KongSheng ?

Post by Brendan » Thu Sep 26, 2019 3:53 am

Confirmed! It took about 4 hours today to make all the subtle changes to fit a Gasket-Valve set for the Mars. The comb is quite different inside to the Amazing 20. A nice design and injection moulding job, well done to Kongsheng.

Marty
Posts: 7
Joined: Tue Sep 24, 2019 4:22 pm

Re: Gasket Valve sets for MARS KongSheng ?

Post by Marty » Thu Nov 14, 2019 8:18 pm

Thanks for the Gasket Valves for the Kongsheng MARS. I half-valved a set of 6.

The GAsket Valves are very easy to insert, as the plates for the Kongsheng MARS are recessed in the mold so the Valves just fit in snuggly, no need to guess if they are aligned properly. Was a bit trickier with the Kongsheng Solist model.

My first impressions of the Gasket Valves:
  • Much easier to half-valve the harp as apposed to gluing in each individual valve. Took about the same time to half-valve the entire harp as it takes me to glue in one valve the old way.
  • I did hear a little buzz on a few of the low notes on one or two of the harps. But this has seemed to have disappeared. Although once or twice that buzz re-appeared. I wonder what I have to do to fix this?
  • I think the true test of the Gasket Valves will be in their longevity.
  • I wonder if one valve goes, will I have to replace the entire Gasket?
Thanks so much for these Gasket Valves Brendan! I will be ordering more.

By the way, in the drop-down on your ordering page, you list the Kongsheng Solist as Kongsheng Soloist. Please note that it is Kongsheng Solist

Post Reply