Hi Brendan,
Just discovered the excellent quality and sound of the KongSheng diatonics.
I see on your site you mention that you have Gasket Valves for the KongSheng Solist, but do you also have them for the KongSheng Mars model?
Thanks again for your innovations.
Marty Howe
https://martyhowemusic.com/
Gasket Valve sets for MARS KongSheng ?
- RunBanjoRun
- Posts: 95
- Joined: Fri Mar 24, 2017 11:39 am
- Location: Canterbury
Re: Gasket Valve sets for MARS KongSheng ?
Hey I'm the forum admin - message me if you have any ideas or requests
David
![Idea :idea:](./images/smilies/icon_idea.gif)
![Idea :idea:](./images/smilies/icon_idea.gif)
![Idea :idea:](./images/smilies/icon_idea.gif)
David
Re: Gasket Valve sets for MARS KongSheng ?
Just heard from David, who manages Brendan's website. Thank you David! :
"Hello Marty
We have now a version that will fit the Mars:
https://brendan-power.com/GasketValves.php
Best wishes,
David
"Hello Marty
We have now a version that will fit the Mars:
https://brendan-power.com/GasketValves.php
Best wishes,
David
Re: Gasket Valve sets for MARS KongSheng ?
Confirmed! It took about 4 hours today to make all the subtle changes to fit a Gasket-Valve set for the Mars. The comb is quite different inside to the Amazing 20. A nice design and injection moulding job, well done to Kongsheng.
Re: Gasket Valve sets for MARS KongSheng ?
Thanks for the Gasket Valves for the Kongsheng MARS. I half-valved a set of 6.
The GAsket Valves are very easy to insert, as the plates for the Kongsheng MARS are recessed in the mold so the Valves just fit in snuggly, no need to guess if they are aligned properly. Was a bit trickier with the Kongsheng Solist model.
My first impressions of the Gasket Valves:
By the way, in the drop-down on your ordering page, you list the Kongsheng Solist as Kongsheng Soloist. Please note that it is Kongsheng Solist
The GAsket Valves are very easy to insert, as the plates for the Kongsheng MARS are recessed in the mold so the Valves just fit in snuggly, no need to guess if they are aligned properly. Was a bit trickier with the Kongsheng Solist model.
My first impressions of the Gasket Valves:
- Much easier to half-valve the harp as apposed to gluing in each individual valve. Took about the same time to half-valve the entire harp as it takes me to glue in one valve the old way.
- I did hear a little buzz on a few of the low notes on one or two of the harps. But this has seemed to have disappeared. Although once or twice that buzz re-appeared. I wonder what I have to do to fix this?
- I think the true test of the Gasket Valves will be in their longevity.
- I wonder if one valve goes, will I have to replace the entire Gasket?
By the way, in the drop-down on your ordering page, you list the Kongsheng Solist as Kongsheng Soloist. Please note that it is Kongsheng Solist